Kurt P. Chroust, DDS

Dentist - Rosemount

15180 Chippendale Ave.,Rosemount, MN 55068

(651) 423-1900

 

Patient Portal

Follow Us Online:

Find Us

Dentist - Rosemount 
15180 Chippendale Ave
Rosemount, MN 55068
(651) 423-1900

Map & Directions

Archive:

 

 

See our reviews

 

Posts for tag: dental implants

By Chroust Family Dentistry
November 10, 2019
Category: Dental Procedures
NewFrontTeethforaTeenagedDavidDuchovny

In real life he was a hard-charging basketball player through high school and college. In TV and the movies, he has gone head-to-head with serial killers, assorted bad guys… even mysterious paranormal forces. So would you believe that David Duchovny, who played Agent Fox Mulder in The X-Files and starred in countless other large and small-screen productions, lost his front teeth… in an elevator accident?

“I was running for the elevator at my high school when the door shut on my arm,” he explained. “The next thing I knew, I was waking up in the hospital. I had fainted, fallen on my face, and knocked out my two front teeth.” Looking at Duchovny now, you’d never know his front teeth weren’t natural. But that’s not “movie magic” — it’s the art and science of modern dentistry.

How do dentists go about replacing lost teeth with natural-looking prosthetics? Today, there are two widely used tooth replacement procedures: dental implants and bridgework. When a natural tooth can’t be saved — due to advanced decay, periodontal disease, or an accident like Duchovny’s — these methods offer good looking, fully functional replacements. So what’s the difference between the two? Essentially, it’s a matter of how the replacement teeth are supported.

With state-of-the-art dental implants, support for the replacement tooth (or teeth) comes from small titanium inserts, which are implanted directly into the bone of the jaw. In time these become fused with the bone itself, providing a solid anchorage. What’s more, they actually help prevent the bone loss that naturally occurs after tooth loss. The crowns — lifelike replacements for the visible part of the tooth — are securely attached to the implants via special connectors called abutments.

In traditional bridgework, the existing natural teeth on either side of a gap are used to support the replacement crowns that “bridge” the gap. Here’s how it works: A one-piece unit is custom-fabricated, consisting of prosthetic crowns to replace missing teeth, plus caps to cover the adjacent (abutment) teeth on each side. Those abutment teeth must be shaped so the caps can fit over them; this is done by carefully removing some of the outer tooth material. Then the whole bridge unit is securely cemented in place.

While both systems have been used successfully for decades, bridgework is now being gradually supplanted by implants. That’s because dental implants don’t have any negative impact on nearby healthy teeth, while bridgework requires that abutment teeth be shaped for crowns, and puts additional stresses on them. Dental implants also generally last far longer than bridges — the rest of your life, if given proper care. However, they are initially more expensive (though they may prove more economical in the long run), and not everyone is a candidate for the minor surgery they require.

Which method is best for you? Don’t try using paranormal powers to find out: Come in and talk to us. If you would like more information about tooth replacement, please contact us or schedule an appointment for a consultation. You can learn more in the Dear Doctor magazine articles “Crowns & Bridgework,” and “Dental Implants.”

By Chroust Family Dentistry
July 03, 2019
Category: Dental Procedures
Tags: dental implants  
YourHealthCouldAffecttheLongevityofaDentalImplant

There’s a lot to like about dental implants for replacing missing teeth. Not only are they life-like, but because they replace the root they also function much like a natural tooth. They also have another unique benefit: a track record for long-lasting durability. It’s estimated more than 95% of implants survive at least ten years, with a potential longevity of more than 40 years.

But even with this impressive record, we should still look at the few that didn’t and determine the reasons why they failed. We’ll soon find that a great number of those reasons will have to do with both oral and general health.

For example, implants rely on adequate bone structure for support. Over time bone cells grow and adhere to the implant’s titanium surface to create the durable hold responsible for their longevity. But if conditions like periodontal (gum) disease have damaged the bone, there might not be enough to support an implant.

We may be able to address this inadequacy at the outset with a bone graft to encourage growth, gaining enough perhaps to eventually support an implant. But if bone loss is too extensive, it may be necessary to opt for a different type of restoration.

Slower healing conditions caused by diseases like diabetes, osteoporosis or compromised immune systems can also impact implant success. If healing is impeded after placement surgery the implant may not integrate well with the bone. An infection that existed before surgery or resulted afterward could also have much the same effect.

Oral diseases, especially gum disease, can contribute to later implant failures. Although the implant’s materials won’t be affected by the infection, the surrounding gum tissues and bone can. An infection can quickly develop into a condition known as peri-implantitis that can weaken these supporting structures and cause the implant to loosen and give way. That’s why prompt treatment of gum disease is vital for an affected implant.

The bottom line: maintaining good oral and general health, or improving it, can help keep your implant out of the failure column. Perform daily brushing and flossing (even after you receive your implant) and see your dentist regularly to help stop dental disease. Don’t delay treatment for gum disease or other dental conditions. And seek medical care to bring any systemic diseases like diabetes under control.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implants: A Tooth-Replacement Method that Rarely Fails.”

By Chroust Family Dentistry
January 14, 2019
Category: Oral Health
FlossingDailyAroundImplantswillHelpPreventLosingYourBridge

Implant-supported fixed bridges are growing in popularity because they offer superior support to traditional bridges or dentures. They can also improve bone health thanks to the affinity between bone cells and the implants' titanium posts.

Even so, you'll still need to stay alert to the threat of periodontal (gum) disease. This bacterial infection usually triggered by dental plaque could ultimately infect the underlying bone and cause it to deteriorate. As a result the implants could loosen and cause you to lose your bridgework.

To avoid this you'll need to be as diligent with removing plaque from around your implants as you would with natural teeth. The best means for doing this is to floss around each implant post between the bridgework and the natural gums.

This type of flossing is quite different than with natural teeth where you work the floss in between each tooth. With your bridgework you'll need to thread the floss between it and the gums with the help of a floss threader, a small handheld device with a loop on one end and a stiff flat edge on the other.

To use it you'll first pull off about 18" of dental floss and thread it through the loop. You'll then gently work the sharper end between the gums and bridge from the cheek side toward the tongue. Once through to the tongue side, you'll hold one end of the floss and pull the floss threader away with the other until the floss is now underneath the bridge.

You'll then loop each end of the floss around your fingers on each hand and work the floss up and down the sides of the nearest tooth or implant. You'll then release one hand from the floss and pull the floss out from beneath the bridge. Rethread it in the threader and move to the next section of the bridge and clean those implants.

You can also use other methods like specialized floss with stiffened ends for threading, an oral irrigator (or "water flosser") that emits a pressurized spray of water to loosen plaque, or an interproximal brush that can reach into narrow spaces. If you choose an interproximal brush, however, be sure it's not made with metal wire, which can scratch the implant and create microscopic crevices for plaque.

Use the method you and your dentist think best to keep your implants plaque-free. Doing so will help reduce your risk of a gum infection that could endanger your implant-supported bridgework.

If you would like more information on implant-supported bridges, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Oral Hygiene for Fixed Bridgework.”

AntibioticsBeforeImplantSurgeryCouldLowerInfectionRiskinSomePeople

If you're considering dental implants, they'll need to be surgically placed in the jaw bone. But don't be alarmed — it's a relatively minor procedure that usually requires nothing more than local anesthesia.

But that being said, it's still an invasive procedure that involves making incisions in gum and bone tissues. That could introduce bacteria into the bloodstream and pose, for certain individuals, a slightly greater risk of infection.

But infection risk is quite low for most healthy patients. As a result, implants enjoy a greater than 95-percent success rate ten years after installation. But some patients have health issues that increase their risk of infection. These include older adults with a weakened immune system, smokers, diabetics or those well under or over their ideal weight.

If you have these or similar health situations, we may recommend undergoing an antibiotic treatment before you undergo surgery. This can help prevent bacteria from spreading and reduce the likelihood of an infection.

Preventive antibiotic therapy is commonplace with many other dental procedures. Both the American Dental Association and the American Heart Association recommend antibiotics before any invasive oral procedure for patients with prosthetic (false) heart valves, past endocarditis, a heart transplant or other heart conditions. To lower the risk of implant failure due to infection, we often advise antibiotics for patients who fall in these categories, as well as those with similar conditions mentioned earlier.

Of course, whether pre-surgical antibiotics is a wise choice for you will depend on your medical history and current health status. We'll consider all these factors thoroughly before advising you. But if you are more susceptible to infection, antibiotics before surgery could potentially lower your risk for an implant failure.

If you would like more information on implant procedures, please contact us or schedule an appointment for a consultation.

By Chroust Family Dentistry
April 19, 2018
Category: Dental Procedures
Tags: dental implants  
GettingDentalImplantsRequiresMinorSurgery

Dental implants are best known as restorations for single missing teeth. But there’s more to them than that—they can also be used to support and secure removable dentures or fixed bridges.

That’s because a dental implant is actually a root replacement. A threaded titanium post is inserted directly into the jawbone where, over time, bone cells grow and adhere to it. This accumulated bone growth gives the implant its signature durability and contributes to its long-term success rate (95%-plus after ten years). It can support a single attached crown, or serve as an attachment point for a dental bridge or a connector for a removable denture.

The method and design of implants differentiates it from other restoration options. And there’s one other difference—implants require a minor surgical procedure to insert them into the jawbone.

While this might give you pause, implant surgery is no more complicated than a surgical tooth extraction. In most cases we can perform the procedure using local anesthesia (you’ll be awake the entire time) coupled with sedatives (if you have bouts of anxiety) to help you relax.

We first access the bone through small incisions in the gums and then create a small channel or hole in it. A surgical guide that fits over the teeth may be used to help pinpoint the exact location for the implant.

We then use a drilling sequence to progressively increase the size of the channel until it matches the implant size and shape. We’re then ready to insert the implant, which we remove at this time from its sterile packaging. We may then take a few x-rays to ensure the implant is in the right position, followed by closing the gums with sutures.

There may be a little discomfort for that day, but most patients can manage it with over-the-counter pain relievers like aspirin or ibuprofen. It’s what goes on over the next few weeks that’s of prime importance as the bone grows and adheres to the implant. Once they’re fully integrated, we’re ready to move to the next step of affixing your crown, bridge or denture to gain what you’ve waited so long for—your new implant-supported smile.

If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implant Surgery: What to Expect Before, During and After.”